Need pics of J-pipes installed - 302

[Tom1320]

Want to be sure that I'm making the right decision

Need O2 sensor bung. That's why I chose Js.

Thanks!

[michael everson]

Is this a GEN 3 Daytona? Just an FYI, all FFR headers now have an O2 bung. You couldnt pay me to use J pipes
Mike

[Tom1320]

Yes gen3.

What are they sending out now? In the kit choices all
that I see is 4 individual pipes straight into two two side pipes

[michael everson]

The 4 into 4 coyote headers have a bung just before the side pipe.
https://www.factoryfiveparts.com/16757-302-headers/

[Tom1320]

I see those headers are for 302 in a type 65
But the side pipes are a 3 bolt type.

What pipes will work with these?

[Papa]

I see those headers are for 302 in a type 65
But the side pipes are a 3 bolt type.

What pipes will work with these?

The Coupe pipes I see on the FFR website look like they have the ball flange on the end that would mate to the header ball flange.

https://thefactoryfiveforum.com/attachment.php?attachmentid=178413&d=1674421586

https://thefactoryfiveforum.com/attachment.php?attachmentid=178414&d=1674421586

Maybe a Coupe builder can confirm that.

[Namrups]

I have a 427, not a 302. The 427 headers look the same as the picture with the ball flange. The side pipes also have the ball flange that bolts right up to the header. The separate piece (ball flange one into 4) is not used in my case.

[michael everson]

If any of you coupe builders have those adapters, I will buy them. I use them
To extend the ones on the cobras. They are about 3/4 too short for my
Liking.
Mike