Coyote Gen 3 - Wire tension help

[ADI]

Hello, me again!

Can someone with a Coyote Gen 3 measure the tension on the crankshaft sensor? more specific the YE-VT (Yellow Violet) wire on pin2 (middle)?

https://thefactoryfiveforum.com/attachment.php?attachmentid=177762&d=1673016044

Would like to know if it is 5V or 12V.


Much appreciated!

I promise that after this ordeal, I`ll write a comprehensive Gen3 x-ray...:cool:

[Jryasko]

I assume you are referring to Voltage. I Did Not take a measurement of mine which is a Gen 3, but being it is a sensor for the ECM it would not be over 5V.