Log in

View Full Version : FS: Fortes AC Pedal Pads and Aluminum Angled Shift Lever (dogleg): SOLD



460.465USMC
01-01-2023, 04:46 PM
Selling Fortes AC pedal pads and dogleg shift lever. These are in like-new condition. I say like-new because I took them out of the box and fitted them on my Roadster. Prices include standard shipping to the lower 48 states.

SOLD $55 for the AC pedal pads. Forte sells the pair for $93 + shipping. These match the Wilwood pedals that come with the Factory Five Roadster kit. I imagine the hole pattern would fit other F5 kits that use the same Wilwood pedal box.

https://thefactoryfiveforum.com/attachment.php?attachmentid=177523&d=1672608478


SOLD $45 for the dogleg shifter. Forte sells it for $90 + shipping. This shifter will move the shift knob two inches forward or rearward, depending on which way you orient it. I made the attached bracket to extend the shift knob even further. I shaped and powder coated the bracket from 0.25" x 2" steel. If you aren't interested in the bracket and screws, I'll sell the shifter for $40.

https://thefactoryfiveforum.com/attachment.php?attachmentid=177496&d=1672543764


https://thefactoryfiveforum.com/attachment.php?attachmentid=177495&d=1672543764

Namrups
01-01-2023, 07:03 PM
Selling Fortes AC pedal pads and dogleg shift lever. These are in like-new condition. I say like-new because I took them out of the box and fitted them on my Roadster. Prices include standard shipping to the lower 48 states.

$55 for the AC pedal pads. Forte sells the pair for $93 + shipping. These match the Wilwood pedals that come with the Factory Five Roadster kit. I imagine the hole pattern would fit other F5 kits that use the same Wilwood pedal box.

https://thefactoryfiveforum.com/attachment.php?attachmentid=177523&d=1672608478


$45 for the dogleg shifter. Forte sells it for $90 + shipping. This shifter will move the shift knob two inches forward or rearward, depending on which way you orient it. I made the attached bracket to extend the shift knob even further. I shaped and powder coated the bracket from 0.25" x 2" steel. If you aren't interested in the bracket and screws, I'll sell the shifter for $40.

https://thefactoryfiveforum.com/attachment.php?attachmentid=177496&d=1672543764


https://thefactoryfiveforum.com/attachment.php?attachmentid=177495&d=1672543764

I'll take the shifter. PM'd you.

smccoy
01-01-2023, 08:23 PM
I'll take the pedal pads if they are still available. PM sent.

460.465USMC
01-03-2023, 03:20 PM
I'll take the shifter. PM'd you.

Hi Scott. Just sent you a PM.

460.465USMC
01-03-2023, 03:44 PM
I'll take the pedal pads if they are still available. PM sent.

Hello. I just replied to your PM.