karlos
12-29-2022, 09:45 PM
Cardone 3L-22207 Rack and Pinion hydraulic transfer tubing assemblies. Includes one high pressure line and one return line, along with new Teflon seals. These are new-in-box, and fit the applications shown in the last photo below. These should fit most of the commonly used 1980-1993 Mustang power rack-and-pinions used in the typical FFR build.
Almost every remanufactured steering rack I've ever received arrived with bent, crushed, and/or leaking transfer tubes. Replacement tubes are hard to come by, so these are good to have on-hand as a better option than returning the entire rack, especially after it's already been installed in the car.
$45 shipped to the lower 48 states.
https://thefactoryfiveforum.com/attachment.php?attachmentid=177349&d=1672359134
https://thefactoryfiveforum.com/attachment.php?attachmentid=177350&d=1672359134
https://thefactoryfiveforum.com/attachment.php?attachmentid=177351&d=1672359134
https://thefactoryfiveforum.com/attachment.php?attachmentid=177352&d=1672359134
Almost every remanufactured steering rack I've ever received arrived with bent, crushed, and/or leaking transfer tubes. Replacement tubes are hard to come by, so these are good to have on-hand as a better option than returning the entire rack, especially after it's already been installed in the car.
$45 shipped to the lower 48 states.
https://thefactoryfiveforum.com/attachment.php?attachmentid=177349&d=1672359134
https://thefactoryfiveforum.com/attachment.php?attachmentid=177350&d=1672359134
https://thefactoryfiveforum.com/attachment.php?attachmentid=177351&d=1672359134
https://thefactoryfiveforum.com/attachment.php?attachmentid=177352&d=1672359134