runamuk
12-21-2022, 08:49 AM
I'm wiring my dash now, yesterday I started connecting all of the switches and gauges on the dash harness. I'm using the Ron Francis wiring and according to the wiring diagram there are four connections on the hazard switch, one to the right front turn signal, one to the left front turn signal and then a third wire from the flasher which has a piggy back wire so it can connect to both sides of the switch (4 connectors from 3 wires).
What about the rear turn lights?
Am I missing something?
Jeff Kleiner
12-21-2022, 09:26 AM
I'm wiring my dash now, yesterday I started connecting all of the switches and gauges on the dash harness. I'm using the Ron Francis wiring and according to the wiring diagram there are four connections on the hazard switch, one to the right front turn signal, one to the left front turn signal and then a third wire from the flasher which has a piggy back wire so it can connect to both sides of the switch (4 connectors from 3 wires).
What about the rear turn lights?
Am I missing something?
The LF and LR are joined together at the spade connector that goes to the SPDT turn signal switch. Same with the RF and RR.
Jeff