Gen 3 Coyote Oil pressure sending unit thread size?

[mkassab]

On the Gen 3, the oil pressure sensor sending unit is straight treads with an O-ring. what fitting size is it? I want to put a tee in to run both the stock Ford sending unit along with a standard gauge sending unit.

Thanks Mark

[weendoggy]

On the Gen 3, the oil pressure sensor sending unit is straight treads with an O-ring. what fitting size is it? I want to put a tee in to run both the stock Ford sending unit along with a standard gauge sending unit.

Thanks Mark

You may want to use this https://pbhperformance.com/product/coyote-swap-oil-pressure-sender-for-all-generations/ It should take care of your issues.

[Nigel Allen]

On the Gen 3, the oil pressure sensor sending unit is straight treads with an O-ring. what fitting size is it? I want to put a tee in to run both the stock Ford sending unit along with a standard gauge sending unit.

Thanks Mark
M12x1.5

[edwardb]

On the Gen 3, the oil pressure sensor sending unit is straight treads with an O-ring. what fitting size is it? I want to put a tee in to run both the stock Ford sending unit along with a standard gauge sending unit.

Thanks Mark

Not just want to... you have to. The calibration in the Gen 3 control pack requires the stock Ford sending unit. It will throw codes and potentially go into limp or shutdown mode if it doesn't see oil pressure. So a "T" is mandatory to add the gauge sender. I used a part like this on mine. https://www.amazon.com/Pressure-Sensor-Adapter-M12x1-5-Stainless/dp/B08DG6YQM1.

[mkassab]

Thanks weendoggy, Nigel and Paul.... exactly the info I needed.

Mark

[facultyofmusic]

Sorry for potentially stating the obvious here, but did you get the gen 3 coyote install kit? If so there should be everything you need to make the tee already

[frankeeski]

Sorry for potentially stating the obvious here, but did you get the gen 3 coyote install kit? If so there should be everything you need to make the tee already

X2

Why spend money for parts that are included with the kit. If you're missing them, contact F5R.

[mkassab]

Yes, the coyote kit is ordered.... I'm just getting a jump and spending a few $s (litterly) won't hurt the budget.

Thx Mark