Phil 33
11-03-2022, 09:04 PM
The center section rear mount does not align with bushing mounts on the frame, Out by 3/16 of an inch. Any recommends on a fix?
progmgr1
11-03-2022, 09:51 PM
If you're talking about an IRS installation, I suggest you look at this thread: https://thefactoryfiveforum.com/showthread.php?43967-IRS-center-section-installation-gen2-hotrod
HTH Keith HR #894
FF33rod
11-04-2022, 02:45 PM
What Keith said. Pretty much every IRS install (not just '33) has the issue to some extent. In addition to pushing out the metal part of the bushing, having a large drift punch is also very helpful.
Steve