View Full Version : Driveshaft Loop recommendations
Mpdevlin
10-21-2022, 02:13 PM
Hey everyone! 1st post here and I'm looking for a little advice. Does anyone have a good recommendation for a driveshaft loop? I just received my Daytona 2 weeks ago and I'm pretty excited about the build. I appreciate any help or advice.
egchewy79
10-21-2022, 02:25 PM
Metco
Mpdevlin
10-21-2022, 02:49 PM
Thank you!
Mpdevlin
10-21-2022, 02:51 PM
Do you know which model number? They make several different one. Is there one that fits better than others on the daytona. Thanks again for your help!
Namrups
10-21-2022, 04:11 PM
I used the Universal Driveshaft Safety Loop from Summit Racing. $29.95 part# SUM-G7900 Just had to cut the base legs down to fit the tunnel. Keep in mind the drive line is offset towards the PS.
https://thefactoryfiveforum.com/attachment.php?attachmentid=161691&d=1643912012
Mpdevlin
10-21-2022, 04:19 PM
Thank you! I really appreciate the help.
Alan_C
10-21-2022, 10:12 PM
I looked up the PN provided on Summit. I was surprised to see it come up at $23.99. A bargain in my book as I was to put something together for a non-FFR project. This kit should do the job nicely.
Thanks
MetalManiac
10-22-2022, 01:40 AM
I also used this one. You need to fit it when the floor and seat panels are installed because they intrude on the bar where this will mount.
I just a piece of scrap aluminum with angles on the sides until it perfectly fit in there, and then used 4 bolts to attach it. I think they are 5/16" diam bolts. pointed up so only the heads protrude downward (minimizes height of stuff under the frame)
Summit Racing Driveshaft Safety Loop [SUM-G7900]
flyingfarley
10-22-2022, 07:45 AM
Thats exactly what I used on my coupe....works great and easy install