VIRGIN MIKE
10-10-2022, 11:37 AM
just got my carbon fiber fender kit (Wow - they are gorgeous); no instructions but install looks to be straight forward; wondering if there any "unknown unknowns" I should watch out for, any issues pulling spindles apart to fit the long mounting bolts? Any secrets I need to know about drilling mounting holes in the carbon fiber?
I was running full fenders and side panels but found that I had to take them off every time I wanted to work on anything - set the timing, adjust the shocks, repair the steering rack, pull the motor to add a hydraulic TO bearing. As a first time builder I had to come back several times to get some things dialed in - wish I had gone to the build school - would have paid for itself in both time and money
I was running full fenders and side panels but found that I had to take them off every time I wanted to work on anything - set the timing, adjust the shocks, repair the steering rack, pull the motor to add a hydraulic TO bearing. As a first time builder I had to come back several times to get some things dialed in - wish I had gone to the build school - would have paid for itself in both time and money