Wiper High Speed Not Working

[32J]

Hi All,

For my FFR supplied wipers, I used the roadster wiper wiring instructions as per

https://www.factoryfive.com/wp-content/uploads/2021/03/WIPERS-Roadster-rev-P.pdf

But when I try the wipers with the key in the Run position, I only get the low speed to work (mid-position of switch). When I put the switch to the top position, the motor cuts out.

Has anyone run across this before? Do I need to move the brown (high speed) wire to a different terminal on the switch, such as to 1 or 7? (Instructions show it to terminal 8).

Thanks,

32J

[Papa]

Be sure that the wires aren't reversed. The diagram is from the perspective of either the plug or the motor, can't recall. It's easy to wire a mirror image.