33 Hot Rod...gas cap

[hooligan989]

Got a gen 1 the gas cap is glued together the cap moves down and leaks. Does anyone have a pictures of the Gen 2 cap, and where I could buy something to fit in the original hole. Been looking online cant find anything that would fit all are either too small or too big for it.

[wallace18]

Check out post #86. This is what I did.

https://thefactoryfiveforum.com/showthread.php?8759-Wallace18-s-33-build/page3

[Mastertech5]

If the holes to mount it to the tank are the same as Gen 2 then you could get a complete new one from FFR. It came in a plastic box wrapped in foam. I threw my box away last weekend. It had a name on it but I don't know what it was. The new cap is solid and twists in to lock. The screw holes across are 3" apart.

172711 172712

[FF33rod]

There is no difference between gen1 and gen 2 as far as gas caps are concerned. There have been different ones used over the years but this is not related to gen 1 vs 2.

For example, the one shown by Masterech5 was also provided in my gen 1 kit and so far I have no complaints, seems to work just fine.
I'm sure this can be sourced from FFR as a separate part if need be

Steve