View Full Version : 3DFiles for NRG Quick release
Smittymgs
08-28-2022, 11:25 AM
Does anyone have the 3d files for the centerpiece to drill the NRG quick release to mate with the Russ Thompson turn signal that they can send me?
Much appreciated
Matt
Namrups
08-28-2022, 05:27 PM
PM'd you. I have the 3d files.
Rian_Colorado
08-29-2022, 09:10 AM
Weren't there some alignment tools floating around that folks had made /printed?
I need to drill mine to mate it with the steering boss too.....
Rian
Namrups
08-29-2022, 01:37 PM
Weren't there some alignment tools floating around that folks had made /printed?
I need to drill mine to mate it with the steering boss too.....
Rian
There were some that others had printed up and were sending around. I have no idea where they might be now. Do you have access to a 3d printer? I can send you the files if you do. If not PM me.
Rian_Colorado
08-29-2022, 08:41 PM
If you have the fike abd can send it to me - there's a 3d print shop near me...... easy enough!
Ill PM you
Papa t
08-30-2022, 06:48 AM
I would also like to have the 3d file sent. That’s my next thing to do. Thanks
Namrups
08-30-2022, 07:11 AM
I would also like to have the 3d file sent. That’s my next thing to do. Thanks
PM'd you.
Namrups
08-30-2022, 07:17 AM
Paying it forward
I have the 2 - 3d STL files needed to print the two spacers for aligning the NRG quick release mod. I am happy to send them to anyone that has access to a 3d printer. I have not figured out how to attach these files to the posts on this forum so if you want them send me your email via PM. I can email them to you.
For those that need the spacers but don't have access to a 3d printer, send me a PM and we can work something out.
When your done with them lets all pay it forward and offer them up to others!