tjnoble
07-30-2022, 01:46 PM
** SOLD **
This Post is for a friend whose health dictates the sale of his unfinished Factory Five MK IV Roadster, Serial number F5R1007945RD.
The kit is in its running and drivable Go-Kart stage. The remaining work required is bodywork, paint, interior carpeting, and final assembly.
The car is located in San Jose, California
Major Component List
- Powder Coated Chassis
- Ford Performance's 535 HP BOSS 351 Block 427 Crate Motor
- Edelbrock Air Gap Intake Manifold
- Quick Fuel 850 CFM Carburetor - Mechanical Secondaries
- MSD 6AL Ignition System with MSD Pro-Billet Distributor
- Ceramic Coated 4-port Headers
- Tremec TKO 600 5-Speed Transmission with Mid-Shifter Option
- Quick Time Bell Housing
- Modern Driveline Kevlar Clutch Pack
- Modern Driveline’s Hydraulic Clutch System
- Moser 8.8 Rear Differential with 31 Spline Axles and 3-Link Rear Suspension
- Rear Gear Ratio is 3:55
- Power Steering
- March Billet Pully System,
- Custom Machine Turned Dash
- Mechanical Throttle Linkage
- Dual Chrome Roll Bars
- Russ Thompson Turn Signal System
- 12.88" Front Wilwood Brake kit
- 12.19" Rear Wilwood Brake Kit
- 17" x 9" and 17" x 10.5" Vintage Halibrand Replica Wheels
- Hand-laid Vinylester One Piece Composite Body + Doors, Hood, & Trunk Lid
Plus, several more options which are not listed here.
Asking $50k for the kit as is, but open to serious offers.
170291171196171197
This Post is for a friend whose health dictates the sale of his unfinished Factory Five MK IV Roadster, Serial number F5R1007945RD.
The kit is in its running and drivable Go-Kart stage. The remaining work required is bodywork, paint, interior carpeting, and final assembly.
The car is located in San Jose, California
Major Component List
- Powder Coated Chassis
- Ford Performance's 535 HP BOSS 351 Block 427 Crate Motor
- Edelbrock Air Gap Intake Manifold
- Quick Fuel 850 CFM Carburetor - Mechanical Secondaries
- MSD 6AL Ignition System with MSD Pro-Billet Distributor
- Ceramic Coated 4-port Headers
- Tremec TKO 600 5-Speed Transmission with Mid-Shifter Option
- Quick Time Bell Housing
- Modern Driveline Kevlar Clutch Pack
- Modern Driveline’s Hydraulic Clutch System
- Moser 8.8 Rear Differential with 31 Spline Axles and 3-Link Rear Suspension
- Rear Gear Ratio is 3:55
- Power Steering
- March Billet Pully System,
- Custom Machine Turned Dash
- Mechanical Throttle Linkage
- Dual Chrome Roll Bars
- Russ Thompson Turn Signal System
- 12.88" Front Wilwood Brake kit
- 12.19" Rear Wilwood Brake Kit
- 17" x 9" and 17" x 10.5" Vintage Halibrand Replica Wheels
- Hand-laid Vinylester One Piece Composite Body + Doors, Hood, & Trunk Lid
Plus, several more options which are not listed here.
Asking $50k for the kit as is, but open to serious offers.
170291171196171197