Forte Engine Lift Kit - Plates/Chains/Crossbar - $30

[460.465USMC]

This is the engine hoist kit from Forte. I paid ~$100 for this when I ordered my drive train.

$30 + shipping from 99208.

https://thefactoryfiveforum.com/attachment.php?attachmentid=139622&d=1608513228

[cgundermann]

I'll take it Chris,

Chris

[460.465USMC]

I'll take it Chris,

Chris

Hi Chris. I should have been more clear in my posting (will update now). I did not like the straps in the setup from Forte, as the attachment points are through a single header bolt on either side. So, I bought these lift plates from eBay, which match the two attachment points on the Gen 3 Coyote (two sets of M14-2.0 v. the M10 header bolt hole). One set is on the DS and the second set is in the rear:

https://thefactoryfiveforum.com/attachment.php?attachmentid=167177&d=1653329493

Here's how the eBay straps looked on mine:

https://thefactoryfiveforum.com/attachment.php?attachmentid=166445&d=1652061147


I would love to sell you my Forte setup, but need to tell you up front I chose to go with alternate straps for the above reason.

[cgundermann]

Thanks Chris, agreed - I was concerned with how that attached to the motor. I'll follow your lead with the 4 point attachment straps.

Chris

[klawrence]

These work nice - liftplate (https://www.motionraceworks.com/products/motion-raceworks-coyote-ford-5-0-lift-plate-mustang-s197-s550-foxbody?currency=USD&utm_medium=cpc&utm_source=google&utm_campaign=Google%20Shopping&gclid=Cj0KCQjwhLKUBhDiARIsAMaTLnEIa1uUDDQ1jdf4r3D0 4adhnuYLLtDJgx7j_cokW4fw2u7dJq9HI34aAmICEALw_wcB)