View Full Version : in-tank fuel pump
alexmak
05-15-2022, 09:27 PM
I know there are a lot of threads about electrical fuel pumps, I've seen them all, trust me! My case: carburetor, no return, electric Holley red pump in the right wheel well. Not happy about its location due to safety, but because of the IRS there's not a lot of options where to mount it.
Because of the safety and noise I'm again considering in-tank fuel pump, but I don't want to do a regulator and a return line. What are my options then? I'm reading about this retrofit Holley (https://www.holley.com/products/fuel_systems/fuel_pumps_regulators_and_filters/fuel_pumps/carbureted_fuel_pumps/carbureted_electric_fuel_pumps/parts/19-365) in tank option, but having to drill a 3in hole in the tank somewhat scares me. Is there anything that can be a "bolt-on" fitting the current openings in the fuel tank? Or this Holley is my best bet?
skidd
05-15-2022, 10:37 PM
Post #3 here. By me.
https://thefactoryfiveforum.com/showthread.php?42800-Fuel-pump-fuel-lines-and-return-lines&highlight=Spectra&p=491371
In tank returnless , no regulator, carb fuel pump in the oem hanger .
alexmak
05-16-2022, 06:32 AM
Post #3 here. By me.
https://thefactoryfiveforum.com/showthread.php?42800-Fuel-pump-fuel-lines-and-return-lines&highlight=Spectra&p=491371
In tank returnless , no regulator, carb fuel pump in the oem hanger .
Thank you. 60GPH, would that be enough for 347 with some spirited driving? I believe the current pump is 125GPH
skidd
05-16-2022, 07:00 AM
According to Summit Racing, 60GPH should be plenty.
https://help.summitracing.com/app/answers/detail/a_id/5245/~/what-size-fuel-pump-do-i-need%3F
CaptB
05-16-2022, 07:00 AM
I did this. It was very easy with the fuel filter/regulator near the tank. No return line needed:
https://www.breezeautomotive.com/shop/fuel-filter-regulator-and-single-line-kit-for-sniper-in-roadster-remote-mount/
Jeff Kleiner
05-16-2022, 07:37 AM
I did this. It was very easy with the fuel filter/regulator near the tank. No return line needed:
https://www.breezeautomotive.com/shop/fuel-filter-regulator-and-single-line-kit-for-sniper-in-roadster-remote-mount/
That’s 50+ PSI; not suitable for a carb.
Jeff
alexmak
05-16-2022, 07:14 PM
Post #3 here. By me.
https://thefactoryfiveforum.com/showthread.php?42800-Fuel-pump-fuel-lines-and-return-lines&highlight=Spectra&p=491371
In tank returnless , no regulator, carb fuel pump in the oem hanger .
Thank you, ordered!
skidd
05-16-2022, 08:17 PM
Hope it works as well for you as it has me.
Don't forget the filter sock. Might be worth adding a fuel pressure gauge at you're carb too. Good luck!
alexmak
05-16-2022, 08:53 PM
Hope it works as well for you as it has me.
Don't forget the filter sock. Might be worth adding a fuel pressure gauge at you're carb too. Good luck!
Did you use any specific type of sock? Something with a hole in the middle? Or the one that goes to a side?
Gauge is a great idea too, I have been thinking about that!
skidd
05-16-2022, 09:09 PM
This is the sock I bought.
https://www.amazon.com/gp/aw/d/B008M4RLRG?psc=1&ref=ppx_pop_mob_b_asin_title
And just cuz... This happens to be the pressure gauge I bought.
https://www.summitracing.com/parts/fue-71502
Lastly.. mounting into the stock hanger , I used a pair of good quality stainless hose clamps.
alexmak
05-16-2022, 09:53 PM
This is the sock I bought.
https://www.amazon.com/gp/aw/d/B008M4RLRG?psc=1&ref=ppx_pop_mob_b_asin_title
And just cuz... This happens to be the pressure gauge I bought.
https://www.summitracing.com/parts/fue-71502
Lastly.. mounting into the stock hanger , I used a pair of good quality stainless hose clamps.
Thank you, thank you!
Blitzboy54
05-19-2022, 03:46 PM
I regret not going with an I tank pump. Mine is right below the passenger seat and it’s loud. Next year I will remove it and install an in tank. That and not using a mechanical linkage are my only regrets.
……. So far
alexmak
05-20-2022, 06:23 AM
I regret not going with an I tank pump. Mine is right below the passenger seat and it’s loud. Next year I will remove it and install an in tank. That and not using a mechanical linkage are my only regrets.
……. So far
That’s where mine is, and now it’s my big project for next winter, I guess - to get rid of it! So I’m collecting ideas on the replacement suggestions