Front suspension ball joint boots part #

[coup in australia]

Can anyone give me Energy Suspension part # for upper and lower front boots or any other good quality urethane boots for the 65 daytona, mine are looking a bit sad already. thanks in advance

166585

[Ltngdrvr]

Should be able to use the ones for 79-04 Mustang, https://www.energysuspensionparts.com/9.13130

[edwardb]

The upper ball joints are actually a Chrysler style and boots from the Energy Suspension 5.13102G set includes new boots. They're only available in a set of four (upper and lower) but you only use the uppers. Fortunately not expensive. I've used these on every build. I've not tried to replace the lower boots since they're press fit into place and so far haven't needed to. I've seen where others have, but sorry I don't know the part number or details. BTW, if you need tie rod end boots, they're Energy Suspension 9.13101G.

[coup in australia]

Thanks edward but those boots are 41.25 mm and mine is more like 45 mm diameter ?? do they squeeze over the base ok166618

[edwardb]

Thanks edward but those boots are 41.25 mm and mine is more like 45 mm diameter ?? do they squeeze over the base ok.

They're not designed to squeeze over the base. They push against the taper on the ball joint. The poly material is much stiffer than the stock rubber boots. They work great, are the right ones, and a whole bunch of us have used them. Including me multiple times as I mentioned. Visible in this picture, including the tie rod end one that fits in a similar way.

https://hosting.photobucket.com/albums/ab234/edwardb123/Factory%20Five%2020th%20Anniversary%20Mark%204%20R oadster/Front%20Suspension/.highres/IMG_3382_zpsbqzdcset.jpg?width=960&height=720&fit=bounds (https://app.photobucket.com/u/edwardb123/a/8e66151d-63b8-4ed5-bcfb-7f4c338bbf3c/p/ae513598-7139-4e1a-b468-59de6f1dc333)

[coup in australia]

You are a legend thank you so much :-)