Emergency brake cable question

[Peppy-WI]

I have a generation 3 Daytona and I'm trying to figure out how to get the Emergency Brake cable attached to the Caliper. There is little to no room. PDF shows caliper on the top of the rotor at 12 o'clock. Mine sits at about 2 o'clock leaving no room to push the Emergency Brake cable through the hole and put the clip on. I tried a button head bolt, but it still didn't give me enough room. Does anybody have the magic answer?

[Ltngdrvr]

Try hooking the cable up before you attach the caliper to the mount.

[LateApex]

You may need an extension to the cable. My kit of early Fall last year did not have that extension (as seen in some of the 2022 Roadster documentation. FFR sent me the bits I needed.

[Ltngdrvr]

I have a generation 3 Daytona and I'm trying to figure out how to get the Emergency Brake cable attached to the Caliper. There is little to no room. PDF shows caliper on the top of the rotor at 12 o'clock. Mine sits at about 2 o'clock leaving no room to push the Emergency Brake cable through the hole and put the clip on. I tried a button head bolt, but it still didn't give me enough room. Does anybody have the magic answer?

Which axle and brakes are you using???

[Peppy-WI]

You were right! Thanks.

[Peppy-WI]

Thanks for your responses. This is the first time I posted to the forum and I'm sure it won't be the last.