Weld on steering quick release

[GT_Rich]

It seems when I search this subject most people are looking for no weld options. I guess I am the odd ball.

I don't have my kit yet and I'm trying to gather every last piece I will need. I don't like the FFR wheel or hub. I will be using dash mounted horn and turn signals, so this should be easy.

I assume the steering shaft is 3/4" DD? Does anyone have a weld on quick release for popular 6 bolt patterns that they like? This is all I've found...

https://www.summitracing.com/parts/joe-13410

Thanks,
Rich

[Lickity-Split]

I use one of these my bracket car:

https://www.strangeengineering.net/product-category/shocks-struts-steering/quick-release-steering-hubs/

Very well made with smooth precision tolerances. You may notice that the steering wheel will only go on in one position. And, easy release from the steering wheel being clocked in any position.

I've used others in the past, but really like these the best.

[Dave Tabor]

I used this and I'm happy with it.

ididit 5010000018

and this

Ford Performance Parts M-3600-RA


Dave
Gen III Coupe #17

[GT_Rich]

I used this and I'm happy with it.

ididit 5010000018

and this

Ford Performance Parts M-3600-RA


Dave
Gen III Coupe #17

That's the wheel I was considering as well. I have an ididit column in my Comet that has taken a lot of abuse, so I like your suggestion all around. Thanks!

[Dave Tabor]

Also, I did not use the FFR-supplied shaft- I simply bought a new one (18" x 3/4" double-D)- cheap and I can swap in the FFR wheel/shaft in about 5 mins if I want to.

Dave

[johnnybgoode]

It seems when I search this subject most people are looking for no weld options. I guess I am the odd ball.

I don't have my kit yet and I'm trying to gather every last piece I will need. I don't like the FFR wheel or hub. I will be using dash mounted horn and turn signals, so this should be easy.

I assume the steering shaft is 3/4" DD? Does anyone have a weld on quick release for popular 6 bolt patterns that they like? This is all I've found...

https://www.summitracing.com/parts/joe-13410

Thanks,
Rich

Have you seen the one that Mark sells?

https://www.breezeautomotive.com/shop/splined-quick-release-steering-hub-kit-for-momo-and-other-6-bolt-steering-wheels/