NRG Quick Release Mod Alignment Jig CAD files

[Chainsaw]

Does anyone have the CAD files for the 2 alignment jigs for the NRG quick release mod? I now have access to a 3D printer and would like to produce something useful.

[Ted G]

I could use this too!

[csmith]

I could use them as well.

[dbo_texas]

I didn't create this but I've shared then with a number of forum members. Feel free to download the 3D files. Also check out the README file for links and other good info on this mod. https://drive.google.com/drive/folders/1QLScUPjjd3ecpD1tTJvzkHVI1Ih3H-g6

[dbo_texas]

I didn't create this but I've shared then with a number of forum members. Feel free to download the 3D files. Also check out the README file for links and other good info on this mod. https://drive.google.com/drive/folders/1QLScUPjjd3ecpD1tTJvzkHVI1Ih3H-g6

Note there are 2 sets of files in that folder .... I'm not sure why. You may need to open them up and check the scale. One set is the correct scale but I'm not sure which one.

[edwardb]

Just throwing this out there -- the fixtures are great and many thanks to those that have put the effort in to design and produce them. But it's not particularly hard to modify and install the NRG piece without the fixtures. If you're careful, mark the holes precisely, and ideally use a drill press, it's not that bad. What I did and worked out great. Outstanding addition to my Coupe.

https://thefactoryfiveforum.com/attachment.php?attachmentid=122488&d=1581633945