Wheel Spinner Hub Locks + Winter Bimini Top Sale still on.

[SJDave]

I was making some Spinner Hub Locks for a local FFR buddy and had enough raw material to make another 4 sets, they are $85 which includes the set screws and shipping. PM me or Email (dalbertalli@comcast.net) if you want a set. I track my Cobra and they won't let me run with the Spinners on unless they are safety wired to the wheel, got tired of pulling the wheels off for a track day to remove the threaded hub also as the "O-ring" retainer wasn't strong enough to take hitting the corner berms and keeping it in place....kind of gets your attention when it starts rattling around. Anyway these are overkill unless you track your car and the organizing group won't allow the spinners.

Bimini Tops on sale thru end of March, $750 + Shipping....contact me if interested and I'll send full pricing for options and information on installation and fit.

Cheers,
Dave163877163878

[SJDave]

​Forgot to mention I have 2 Black tops in stock ready to ship, FREE storage bag on these two as part of the winter sale of $750 + shipping (about $65)
Contact me by PM or dalbertalli@comcast.net if interested.

[SJDave]

Winter sale is almost over, save $100 ordering this month. Here's a review from Andy in Canada (#97 in the previous photo).

https://www.ffcars.com/threads/bikini-top-again.643904/#post-6134804

** One Black Top left with free storage bag.
** 2 Spinner Hub Locks available.


​Forgot to mention I have 2 Black tops in stock ready to ship, FREE storage bag on these two as part of the winter sale of $750 + shipping (about $65)
Contact me by PM or dalbertalli@comcast.net if interested.

[SJDave]

Pics of just installed Top in Dubonnet Tweed Burgundy and Natural Stripes, I want the same combo for my car now!


Winter sale is almost over, save $100 ordering this month. Here's a review from Andy in Canada (#97 in the previous photo).

https://www.ffcars.com/threads/bikini-top-again.643904/#post-6134804

** One Black Top left with free storage bag.
** 2 Spinner Hub Locks available.

[SJDave]

** Last 2 days of winter sale, price goes up to $850 on April 1st. PM, Email (dalbertalli@comcast.net) if you want to reserve one a the sale price for $200 if your build is not quite ready yet for a top. Thanks!


Pics of just installed Top in Dubonnet Tweed Burgundy and Natural Stripes, I want the same combo for my car now!

[SJDave]

2 Bimini top kits left at this time; Sale price still valid...

Have 2 spinner lock sets available for the newer FFR Halibrand Replica wheels (2.75" ID), and 1 set for the older replica wheels (3" ID).


I was making some Spinner Hub Locks for a local FFR buddy and had enough raw material to make another 4 sets, they are $85 which includes the set screws and shipping. PM me or Email (dalbertalli@comcast.net) if you want a set. I track my Cobra and they won't let me run with the Spinners on unless they are safety wired to the wheel, got tired of pulling the wheels off for a track day to remove the threaded hub also as the "O-ring" retainer wasn't strong enough to take hitting the corner berms and keeping it in place....kind of gets your attention when it starts rattling around. Anyway these are overkill unless you track your car and the organizing group won't allow the spinners.

Bimini Tops on sale thru end of March, $750 + Shipping....contact me if interested and I'll send full pricing for options and information on installation and fit.

Cheers,
Dave163877163878

[SJDave]

2 Tops still available


2 Bimini top kits left at this time; Sale price still valid...

Have 2 spinner lock sets available for the newer FFR Halibrand Replica wheels (2.75" ID), and 1 set for the older replica wheels (3" ID).

[Madfor67]

Can Bimini top be installed with just the driver side roll bar? I don’t think that’s possible unless I install some sort of an extension bracket tied to the driver side rollbar. Just wondering if you have that kind of solution for those of us with only one rollbar. Thx

[SJDave]

Can Bimini top be installed with just the driver side roll bar? I don’t think that’s possible unless I install some sort of an extension bracket tied to the driver side rollbar. Just wondering if you have that kind of solution for those of us with only one rollbar. Thx

YES...it requires you to purchase a suction cup mount I designed, $75 extra. The Top frame structure is very rigid and only requires "vertical" support on the passenger side, the support uses a high quality RAM 3" suction mount with stainless steel tubing and "ski boat clevis" fittings to attach to the rear support tube with a single 1/4 x 20 bolt. In the picture you will see a green cable, that is a quick release pin so that the Top and Rear support tube can be removed without dropping hardware on the paint. The bracket it connects to can be left attached to the rear tube for storage. So just pop in the QR pin and your done on the passenger side. Here's some pics on my car with dual rollbars demonstrating where the single mount goes, I can't quite move it toward the centerline of the car to get the bracket attached squarely, due to bumping into the factory five rear bar strut. I have only sold one single mount so far and that individual hasn't even received his Mark 4 kit yet....so no pics installed available.

[SJDave]

Bump..


2 bimini top kits left at this time; sale price still valid...

have 2 spinner lock sets available for the newer ffr halibrand replica wheels (2.75" id), and 1 set for the older replica wheels (3" id).

[SJDave]

Holiday special; $700 for complete BLACK Top with storage bag. Had an someone backout on their order, ready to ship in a few days after I fab adapter brackets for your windshield to Rollbar distance.

Two tops available where you can pick your fabric color still at $750.


I was making some Spinner Hub Locks for a local FFR buddy and had enough raw material to make another 4 sets, they are $85 which includes the set screws and shipping. PM me or Email (dalbertalli@comcast.net) if you want a set. I track my Cobra and they won't let me run with the Spinners on unless they are safety wired to the wheel, got tired of pulling the wheels off for a track day to remove the threaded hub also as the "O-ring" retainer wasn't strong enough to take hitting the corner berms and keeping it in place....kind of gets your attention when it starts rattling around. Anyway these are overkill unless you track your car and the organizing group won't allow the spinners.

Bimini Tops on sale thru end of March, $750 + Shipping....contact me if interested and I'll send full pricing for options and information on installation and fit.

Cheers,
Dave163877163878

[GrooveM]

I have a Mark I with only 1 roll bar. Do they still work with that configuration?
Apprently I’m a bit blind today. I see the question and answer above. Thank you for your patience.

[SJDave]

I have a Mark I with only 1 roll bar. Do they still work with that configuration?
Apprently I’m a bit blind today. I see the question and answer above. Thank you for your patience.

Yep, will work fine on your Mark 1. It requires a suction mount that you probably saw in the earlier post, $75 extra.

I just need the distance from the windshield square nut groove to the centerline of the single rollbar to fabricate a couple unique brackets; just hook a tape measure in the groove kind of lined up with the centerline left to right of the rollbar and measure back to midpoint of the tubing.

** Send an Email to me and I will send more info and the Installation Instructions to help you understand the construction. Include your address and I'll mail a Sunbrella Fabric sample book to you.