Ford & Jeep Fan
02-27-2022, 12:17 AM
This was a Custom grind Crane Cam . not a catalog item. It will fit Factory 302/351 Hyd roller engines. Crane Part # 44HR00029 (Yes, a real part number)
Made on a 8620 steel core.
Specs Duration 220 @ 050 .311 lobe lift =.498 with stock 1.6 ratio rockers =.528 with 1.7 rockers --114 lobe separation
Grind number HR-220/311-14 Basic Rpm range 2400-6000 Excellent cam for forced induction.
$200 plus shipping from Kitts Hill, Ohio 45645.
looks like this with the copper plating https://www.stangnet.com/mustang-forums/attachments/cr449641_-_1_thumb_1-jpg.692592/
Made on a 8620 steel core.
Specs Duration 220 @ 050 .311 lobe lift =.498 with stock 1.6 ratio rockers =.528 with 1.7 rockers --114 lobe separation
Grind number HR-220/311-14 Basic Rpm range 2400-6000 Excellent cam for forced induction.
$200 plus shipping from Kitts Hill, Ohio 45645.
looks like this with the copper plating https://www.stangnet.com/mustang-forums/attachments/cr449641_-_1_thumb_1-jpg.692592/