Robert 2006
02-19-2022, 09:21 PM
I had not driven the car in a few months, but the last time I drove it and up to that point everything was fine. 1991 5.0 factory EFI and ECU.
I turn the key to start and nothing I do get fuel pressure, gages peg and reset an normal. I checked and I have current at the starter relay from the battery. When I turn the key to start I have current at the starter relay from the wire coming from the ignition switch, but have not current to the output side of the relay going to the starter. Replaced the starter relay but still the same problem. I have also remove the starter and tested thinking maybe a short in it but it works fine. All fuses in the fuse panel are good. What am I overlooking could it be the ignition switch or the A9L computer took a dump?
Thank in advance, Robert
I turn the key to start and nothing I do get fuel pressure, gages peg and reset an normal. I checked and I have current at the starter relay from the battery. When I turn the key to start I have current at the starter relay from the wire coming from the ignition switch, but have not current to the output side of the relay going to the starter. Replaced the starter relay but still the same problem. I have also remove the starter and tested thinking maybe a short in it but it works fine. All fuses in the fuse panel are good. What am I overlooking could it be the ignition switch or the A9L computer took a dump?
Thank in advance, Robert