View Full Version : ON-ON switch
Higgybulin
02-11-2022, 09:32 AM
Does anyone have an extra 3 prong ON-ON switch that they wouldn't mind sending my way? I am wiring up a set of the fog lights that come with the coupe that I got from edwardb and want to change out the switch. The switch with the fog lights has red-white-black wires and I assume that the 3 prong ON-ON is what I need to replace it. Oooorrr, suggestions to wire it with just a 2 prong ON-OFF switch. Posters choice LOL!
Higgy
Jeff Kleiner
02-11-2022, 10:04 AM
On/On toggle is used to switch between high and low beams. You need a simple On/Off switch.
Jeff
Higgybulin
02-11-2022, 10:21 AM
On/On toggle is used to switch between high and low beams. You need a simple On/Off switch.
Jeff
That's what I was hoping as I have a couple of those, but what do I do with the third wire?
162261162262
JohnK
02-11-2022, 11:03 AM
With a simple on/off toggle you would switch the red and white wires, which are the trigger power for the relay. The third (black ground) wire on the lighted toggle is simply there to provide a ground for the light in the switch.
Higgybulin
02-11-2022, 06:01 PM
Ok, here's what I did. Just want to make sure the reds are right.
162278