cgundermann
02-02-2022, 06:33 PM
I have finally received all the add ons and I have my Langmuir Systems CrossFire CNC plasma cutter about 90+ percent put together. I'll need some time to get familiar with the modeling software, but anyone who needs anything precisely cut out of steel or aluminum etc., PM me with the dimensions and requirements and I'll get it done for you for free. I'd like to pay it forward to our FFR community from whom I have received so much from. Driving, building and the interactions on the Forum are all kinda "My Happy Place".
As I get her up and running, I'll better know its capabilities and limitations. I did order the extension kit which adds 10 inches to the table's 25.3" X 23.3" dimensions. I'm using Razorweld's Vipercut plasma cutter which will cut up 1/4 inch.
It will be a bit before I'm 100% operational, but just wanted to put it out there if anyone needs anything. My first project will be the Type 65's hood roller latching guide bracket that Paul (EdwardB) has provided the schematics for on the Forum...
161676
Chris
As I get her up and running, I'll better know its capabilities and limitations. I did order the extension kit which adds 10 inches to the table's 25.3" X 23.3" dimensions. I'm using Razorweld's Vipercut plasma cutter which will cut up 1/4 inch.
It will be a bit before I'm 100% operational, but just wanted to put it out there if anyone needs anything. My first project will be the Type 65's hood roller latching guide bracket that Paul (EdwardB) has provided the schematics for on the Forum...
161676
Chris