looking for a 351C cam

[Ford & Jeep Fan]

Does Anyone just happen to have one of these two specific (Hyd Roller) Cams,...............For Sale?? Or if you happen to see one.

Crane #529811 ............ 236/240 @050 112 Sep .621/.631 lift

Lunati #20320712 ..........231/239 @050 110 sep .611 lift


Possible partial trade
I do have a smaller Crane Hyd Roller Cam for a 289-302-351W HR220/311-14 220/220 @050 (.498 lift 1.6) (.529 lift 1.7) 114 lobe separation.

The wide 114 lobe separation works quite nice with blowers.

[NAZ]

If you're having a hard time finding a source for these two cams, have you considered having one custom ground? If you are dead set on these specs, Comp Cams custom ground cams are very reasonably priced.

[BadAsp427]

Check this out... Jegs : https://www.jegs.com/i/Lunati/638/20320712/10002/-1