How do I remove the side pipes on my Mark I roadster?

[GrooveM]

I own a Mark I Roadster that I purchased and I want to remove the side pipes to have them ceramic coated. Removing the bolts from the headers is no problem but I am not familiar with the support stud that’s mounted through a rubber support that’s mounted to the frame. I’m guessing that I simply pry the rubber support off the pin on the frame but before I wreck something I thought I would ask here. Thanks in advance for your help.
159594

[R. Button]

Squirt some dish soap into the hole in the rubber that the pin comes through. That will allow the pin to slip out of the rubber hanger.

[GrooveM]

Thanks Ralph. I actually bought a pair of exhaust removal pliers from Advanced Auto Parts too. I figured it was simple but again I didn’t want to accidentally wreck something. Cheers!

[mburger]

GrooveM, did you get it off? Make sure the “pin” isn’t actually a small bolt. Normally it would have a washer on it but maybe the head of the bolt pulled into rubber?

[j.miller]

Drill and Blast.....Did a little hard rock mining in my younger days....It may not be the right way but it sure is a lot more exciting ! Hope this helps...da Bat