Bolt patterns, offsets for truck

[Strongbad71]

I have a 35 Truck coming at the end of February. I didn't see any specs on the rim choices - I don't even know the bolt pattern!

For instance, I am getting 20", but I need to know the distance from the face of the brake disc to the bed of the truck, in order to choose a width and appropriate offset. I am sure if the truck was in front of me, I could make these determinations...

I did some searching on this forum and got a few pieces of info, such as the bolt pattern is probably the same as the SN95 Mustang. Still not sure about width/offset.


Thanks! This is my first build so just getting off the ground.

Derek
NJ

[wallace18]

The 33 wheels work on the truck. I have these on my 35. The specs are here also.

https://www.factoryfiveparts.com/34142-18-and-20-33-bonneville-style-wheels-gray/

[bnelson]

I have a 35 Truck coming at the end of February. I didn't see any specs on the rim choices - I don't even know the bolt pattern!

For instance, I am getting 20", but I need to know the distance from the face of the brake disc to the bed of the truck, in order to choose a width and appropriate offset. I am sure if the truck was in front of me, I could make these determinations...

I did some searching on this forum and got a few pieces of info, such as the bolt pattern is probably the same as the SN95 Mustang. Still not sure about width/offset.


Thanks! This is my first build so just getting off the ground.

Derek
NJ

Depends on if your running open wheeled or not? If open wheeled its pretty much anything you want. Below the rear is standard 12" wide US wheel smoothies with 5.25" backspace. Plus I had to use 1/2 spacer so the brakes would clear so that would make them 4.75 backspaced, but you can see how much room there is between tire and bed. Fronts are 10" with 4.50 backspace. They too had a lot of room to go either way. bolt patterns are 5x4.5 or (5x114.3) Same thing. I'd give you a measurement but I sold it a while back :(
159550

[Strongbad71]

Depends on if your running open wheeled or not? If open wheeled its pretty much anything you want. Below the rear is standard 12" wide US wheel smoothies with 5.25" backspace. Plus I had to use 1/2 spacer so the brakes would clear so that would make them 4.75 backspaced, but you can see how much room there is between tire and bed. Fronts are 10" with 4.50 backspace. They too had a lot of room to go either way. bolt patterns are 5x4.5 or (5x114.3) Same thing. I'd give you a measurement but I sold it a while back :(
159550

Thanks for the info and picture! Yes, open wheel, just didn't want a huge gap between bed and inner tire. This helps.

[Strongbad71]

The 33 wheels work on the truck. I have these on my 35. The specs are here also.

https://www.factoryfiveparts.com/34142-18-and-20-33-bonneville-style-wheels-gray/

I was wondering if other body styles would be compatible rim-wise. I thought no, but the the specs on these rims give me a good basis. Thanks!