LS1/6 sensors ?

[Austria]

Hello!
Need some help pls! :rolleyes:

Looking forward to find, specify and connect the sonsors of the engine.

Thanks for your support on that!

Oil - fill - sensor
- technical info ?
- need to finde a connector
- bulb to show if the sensor gets active
- working on 5V ?

THX

[mwd]

Here is the connector:
https://www.rockauto.com/en/moreinfo.php?pk=2066272&cc=1380024&pt=15702
WVE 1P1362
ACDELCO PT2830

Reference would be for a 2002 Corvette.
I believe these sensors are essentially open when oil is below the level and closed when oil is above the level, so they should work fine with any DC voltage below 18V (including 5V logic), but I wouldn't pass a lot of current through them.

Michael

[Hoooper]

Yeah its a low oil level sensor, basically its a switch. Most of these are 5V. The wiring diagram doesnt even say which is pretty odd.

[Austria]

Hi, 5V, that means the operation voltage is 5V, 5V need to get out of the gauge (Speedhunt does).
When the levelsensor connects to ground the gauge recognices that the voltage is down and no Voltage to the signal light.
The contact gets open, the 5V are getting on the light, it shines.
OK, I think I got it, thx !!