T56 reverse lockout question

[Papa t]

I am planning to install a reverse lockout kit in my Coupe and have a wiring question. I have the FFR GPS gauges that I believe uses a antenna. Where would I get the VSS information. In my Superlite SLC, I installed a Dakota Digital 50-2 in place of a wheel sensor for the signal. Please advise. Thanks

[edwardb]

The T56 has a built-in speed sensor. You don't need it for your GPS gauges. But you can use it as the input for a speed sensitive module for your reverse lockout. I used this one in my Gen 3 Coupe. https://www.summitracing.com/parts/awr-elun-10013. Works perfectly.

[Papa t]

Thanks for the quick response. Are the pigtail included or did you have to purchase separately? Trying to get the power train ready for installation. Still have away to go.

[edwardb]

Thanks for the quick response. Are the pigtail included or did you have to purchase separately? Trying to get the power train ready for installation. Still have away to go.

The referenced module doesn't include any connectors. Only the bare wires. Per my build notes, I purchased this pigtail set: https://www.amazon.com/Muzzys-Transmission-Harness-Connector-Pigtail/dp/B00MR48BU8. I know I used the one for the reverse lockout solenoid. Plus the one for the backup lights as I added those to the build. Pretty sure the VSS (speed sensor) is the same as what's already on the Ron Francis harness.

[Papa t]

Great, thanks