Aluminum panel inventory

[Skuzzy]

I just opened the aluminum panel box and have a problem. Only 6 of the pieces have numbers on them. There is supposed to be 33 items in the box, but there are only 31. I am left trying to figure out what the panels are solely by the terse description on the packing list.

Some of the panels are obvious (transmission tunnel, for instance) but most are not.

I am wide open to suggestions. I need to figure out which two panels are missing.

[edwardb]

There's an aluminum panel diagram in the build manual. In mine, it's page 52. Although you probably have a later revision so the page number could be different. It's listed in the table of contents.

[Skuzzy]

There's an aluminum panel diagram in the build manual. In mine, it's page 52. Although you probably have a later revision so the page number could be different. It's listed in the table of contents.

Well heck, I would not have and have not thought of looking in the manual. DOH! Thank you!

[Indy Shu]

I was missing the gauge panel and the template for the inside door latch handle (which probably isn't needed. there's a template in the manual.)
If you flip through the final assembly part of the manual you'll see some of the unidentified pieces.
hth

[Skuzzy]

Ok, so I got most all the pieces identified. I decided to mark them all and post pictures of them here. Maybe it might help the next person. I used the names from the inventory sheet. They do not match what is in the manual.

It will take a couple of posts.

156824156825156823156826156827156828

[Skuzzy]

Continued
156829156830156831156832156833156834

[Skuzzy]

More....
156835156836156837156838

[Skuzzy]

Now, that is all I can identify, with certainty. I have three pieces left to identify. Anyone have any idea what they are?

Here is the list of parts I have not checked off from this box:

1) 60439 Front Wheel, Rear Lower Splash guard, left
1) 60440 Front Wheel, Rear Lower Splash guard, right
1) 60522 Side Vent Template
2) 60797 Upper Rear Splash Support
1) 35084 Inside Door Handle Template
1) 60315 Platinum Gauge Panel

As you can see, I am missing some parts. I just need to identify what they are. Any help would be appreciated.

156839

[65 Cobra Dude]

Skuzzy,

The top 2 are the lower splash guards, left and right (60439 and 60440). They go in front of the pontoons. The lower one (60522) is the side vent template.

Henry

[Skuzzy]

Skuzzy,

The top 2 are the lower splash guards, left and right (60439 and 60440). They go in front of the pontoons. The lower one (60522) is the side vent template.

Henry

I thought that may be the case, just did not want to guess and be wrong. Thank you!

[Indy Shu]

The (2) 60797 splash supports are small slightly bent tabs to support one of the hatch area panels on each side, i forget which panel. They are maybe 3" x 1"