View Full Version : Roll Bar Head Rest Pad
ggunter
11-11-2021, 02:25 PM
Has anybody seen this item. It looks like it fits the older fater roll bar, just wondering if there is a newer version?155969155970
Wayne r mckee
11-11-2021, 08:17 PM
That’s the cobra earl headrest , he had some health issues and quit making them. Not sure if anyone is making them now .
nucjd19
11-11-2021, 09:51 PM
That’s the cobra earl headrest , he had some health issues and quit making them. Not sure if anyone is making them now .
That is a shame. They are beautiful.
ggunter
11-12-2021, 08:37 AM
Thats a part for the niche market to start making.
ggunter
11-12-2021, 08:40 AM
Just a tiny tap in the rear from someone and the driver would have a very bad day and at the least a big bruise and a real bad headache. I have the clamps and the wheel chair knee pad to make the setup others have used but I sure would like to see something made like the one in the picture.
swwebb
11-12-2021, 11:52 AM
Just get high back seats!
Thought I'd share the roll bar head rests we did for the Roadster. I used some flat stainless and rolled the ends using heat to fit around the roll bars and polished it to match my breeze SS bars. I drilled and tapped holes in the roll bar and attached with button head screws. They can be easily removed by sliding over the bars. My wife and I made the head rests using a piece of 3/4 plywood and 4" high density foam. She sewed and embroidered the vinyl. Then I cut a piece of sheet metal and covered it to go on the back and thru bolted them using T nuts on the backside of the plywood. I'm really happy with the way they turned out. But, they ended up costing about $2000!!! She needed a new industrial sewing machine to make them. Can't argue with that logic, I've used it too many times. LOL
Bob