Numeric Shifter Bracket

[VRaptor SpeedWorks, LLC]

If anyone ever needs to mount one of the Numeric shifters, I now have a mounting bracket for that. I'll have to get it added to my website in the next few days. The cut-outs along the mounting flanges are to clear the e-brake bracket as well as where the FFR shift-rod bearing mount brackets are welded to the top of the tubes.

154883

154884

154885

154886

[VRaptor SpeedWorks, LLC]

BTW.....if anyone is ever interested in switching from your current Brandwood cable shifter to this Numeric shifter, you can use your existing Brandwood cables and just swap the ends out....with a bit of work. That saves a ton of money. The threads on the cables at the brandwood shifter side are 1/4-28. You need to go to a 12mm rod end for one cable and a 10mm ball socket for the other cable. I bought a 12mm rod end with a 12mm threaded male shank and drilled the shank out and tapped it to 1/4-28. I found a 10mm ball socket with 8mm female threads....so took an 8mm bolt and drilled it and tapped it out to 1/4-28 in my lathe....yeah, not much wall thickness left there, but it worked. Used permanent loctite to lock the 8mm threads into the ball socket and now have a 10mm ball socket with 1/4-28 female threads.

The Numeric shifter ran about $700. They quoted me about $1300 with the cables.....so keeping the Brandwood cables saves you about $600.