Power Steering Cable Routing

[BeePea]

Hey guys, another dumb question.

For my power steering, does the upper line (from the rack) go into the pump, and the lower line goes to the reservoir on the right? Image of my pump below.

https://thefactoryfiveforum.com/attachment.php?attachmentid=154624&d=1634750571

Thanks!

[weendoggy]

The port on the pump goes to the port closest to the rack body (lower) and the port closest to the steering shaft input (upper) is the return, which goes to the P/S reservoir. The rack has two different size thread fittings so make sure you get the correct ones. Opposite of what you said.

[BeePea]

The port on the pump goes to the port closest to the rack body (lower) and the port closest to the steering shaft input (upper) is the return, which goes to the P/S reservoir. The rack has two different size thread fittings so make sure you get the correct ones. Opposite of what you said.

Thanks!

[CraigS]

https://live.staticflickr.com/7867/46799733181_edddca9879.jpg (https://flic.kr/p/2eiwScp)PS rack adjuster (https://flic.kr/p/2eiwScp) by craig stuard (https://www.flickr.com/photos/152454123@N04/), on Flickr