New Front Splitter Canards

[VRaptor SpeedWorks, LLC]

I've designed some new front splitter canards for another customer. These are made to be an add-on to my aluminum front splitter. This design extends below the aluminum splitter inboard to the hood flange that the splitter attaches to.

If you already have one of my front splitters, these are a pretty easy add-on, or you can order them along with our splitter.

154415154416154417154418

[VRaptor SpeedWorks, LLC]

154419154420

[crash]

Maybe you are aware, but it appears that there is a left front brake rotor on the right front in that picture?

[VRaptor SpeedWorks, LLC]

LOL.....No....I had not noticed that until now. This car was about 85% complete when we got it here and we've been focused on nothing but bodywork so far.....so I have not paid much attention to anything mechanical yet. The good news is that they did manage to get the rear rotors on correctly...... :D

PS.....at least that's a much easier fix than all of the cars we've gotten in here with all 4 calipers on the wrong side.....or even worse....the car that had the Wilwood Big Brake kit installed and the shims all installed wrong with the caliper so off-center of the rotor that it took 6 people to push the car on flat pavement. Spent hours getting the shims right so the calipers were centered on the rotors, dumped in brake fluid and went to bleed them and THEN figured out that all of the calipers were on the wrong side of the car with all of the bleeder screws facing down.....

[crash]

Many times I hear Dave Smith's words in my head when seeing stuff like that..."some people can work on cars, and some should never even consider it". I'm paraphrasing, but the idea is clear. And to think he got a ton of grief about that statement...