E-brake attachment with 2015 IRS brakes

[flight_83]

Super frustrated with how vague the build manual is. I’ve got the IRS and using 2015 calipers and 13” rotors and there is no mention of how to attach the E-brake cable. It mentions a bracket for the Wilwood brakes but there are no adapters in my hardware. Any advice is appreciated.

[David Williamson]

There are small 90 deg brackets that the cable attaches to, maybe you are missing them?
I don't have a good picture of them.
David W

[daxtojeiro]

I had the same issue, I made my own little adaptor up to connect the supplied cables to the calipers.
Phil

[ProJoe]

I have run into the same issue as you OP, the brackets included don't appear they will work for the 2015+ IRS setup. A few people have said they have fabricated up their own brackets but I haven't seen any pictures yet.

[FF33rod]

If it is at all helpful, here is a pic from the hot rod manual for the same thing - IRS, Wilwood brake upgrade...

153400

Steve

[daxtojeiro]

153408
153408

No idea how to upload pictures - so will give it a go, but these are what I made up, not too hard to do either,
Phil

[daxtojeiro]

153409

[David Williamson]

The part Steve "33rod" posted is what you need. I had the wrong ones in my brake hardware a call FFR and they should send them to you.
David W

[ProJoe]

I thought the ones Steve posted are for the wilwood brakes? I have that same adapter and there is no way it works on the OEM mustang rear brakes for the IRS.

[Fixit]

Maybe this'll help... E-Brake cables on #9365 (https://thefactoryfiveforum.com/showthread.php?27544-40-Watt-Garage-6200-miles&p=335899&viewfull=1#post335899)