Log in

View Full Version : Steering slip shaft Belleville washers



wgaf41971
09-07-2021, 12:43 PM
Does anyone have an extra Belleville washer from the collapsible steering shaft? or know where and what the part # is to buy some? Thank You Very Much, William Friskey

michael everson
09-07-2021, 05:14 PM
William some of us dont even use them anymore. Instead drill and tap 2 holes spaced apart on the same side of the outr shaft. I use 1/4-20 Use setscrews to take up the slack. Tighten and loctite just enough so the slop is gone but the shaft can still collapse.
Mike

wgaf41971
09-08-2021, 01:11 PM
OK, Thank You!