View Full Version : Gen2 gtm diffuser mounting hardware and instructions
VD2021
02-15-2011, 03:13 PM
Is there an expected date on when the instructions and hardware to mount the Gen2 difusser will ship? Thanks.
R/s
Vidal
Andy@FFR
02-15-2011, 03:34 PM
The Gen2 GTM diffuser is gets riveted along the sides of the diffuser where it meets the body. We used bolts and spacers on our GTM because we used a modified Gen1 diffuser which is not as wide as the Gen2.
VD2021
02-15-2011, 09:25 PM
The Gen2 GTM diffuser is gets riveted along the sides of the diffuser where it meets the body. We used bolts and spacers on our GTM because we used a modified Gen1 diffuser which is not as wide as the Gen2.
OK, but what do we do in the middle? I've held the diffuser to the body and the sides meet the body but the middle does not. Thanks.
R/s
Vidal
Brian Z
02-17-2011, 10:09 AM
Vidal,
The middle does not attach to the body. There should be a gap about 2 1/4" from the diffuser and the body. We used some bolts and spacers on our yellow car. The standard kit is designed to be open in that area, but you could choose to attach it to the body some way.
Best regards,
Brian Zakrzewski Tech and Sales
VD2021
02-17-2011, 11:04 AM
Brian,
Thanks.
R/s
Vidal