thomas colina
11-03-2011, 08:09 AM
Would you post the directions for adjusting the rear panhard bar, to center the rear end, on the 33 Hotrod. Thanks, TC :confused:
Brian Z
11-03-2011, 10:12 AM
Tom,
The pan hard bar just centers the rear end from left to right. You can center it off of the frame or use a straight edge or a laser on the wheels to the front of the car. You want the pan hard bar to be level with the rear end at ride height.
The rod ends are 1 left hand thread and one right hand thread. To adjust it you simply turn the bar one way to tighten and the opposite direction to loosen the rod ends. This will push the rear end left or right.
Best regards,