Log in

View Full Version : gauge backlight question



Robert 2006
08-05-2021, 09:32 PM
I have the speed hut / FFR classic gages and the backlighting has stopped working.
The red dial light still works/dims thru the headlight switch.
Could it be that the dimmer module has gone bad.
Looking for where to start tracking this problem down.

Thanks in advance.
Robert

Jeff Kleiner
08-06-2021, 06:05 AM
I have the speed hut / FFR classic gages and the backlighting has stopped working.
The red dial light still works/dims thru the headlight switch.
Could it be that the dimmer module has gone bad.
Looking for where to start tracking this problem down.

Thanks in advance.
Robert

Likely. I’ve had a few of them fail on multiple builds.

Jeff

Robert 2006
08-14-2021, 03:53 PM
Speed Hut sent me a new dimmer module at no charge. Can I just splice the power and light pigtail so I don't need to fish out all that wire from under the dash?

Robert 2006
08-18-2021, 05:37 PM
Ttt

phileas_fogg
08-20-2021, 01:04 PM
Yes. But as I recall the wire is extremely fine; you may have trouble getting a good crimp and be forced to solder.


John