View Full Version : Wire loom hanger
alexmak
07-31-2021, 09:04 PM
When I bought an engine from Blueprint, it came with a wire loom set, and it has L-brackets that keep breaking, probably because of vibration. I already got a couple from BPE as a replacement, but I feel like I need something more permanent there. The bracket part is not available separately, only as a set with wire loom. Does anyone know of any suitable replacement that can be purchased? I don’t have the tools to make one myself unfortunately
https://thefactoryfiveforum.com/attachment.php?attachmentid=151485&d=1627782985
Alex, I went with this setup from Wild Horses running a 427. If you end going with this setup be sure and do not over tighten the plastic holders because they will break if you crank them down too much (ask me how I know). It seems like a nice setup and has been working well other than the plastic holder I broke because I went stupid tight on it.
https://www.wildhorses4x4.com/product/Machined-Aluminum-Plug-Wire-Divider-Satin/broncoperformanceignition
alexmak
08-01-2021, 07:03 AM
Alex, I went with this setup from Wild Horses running a 427. If you end going with this setup be sure and do not over tighten the plastic holders because they will break if you crank them down too much (ask me how I know). It seems like a nice setup and has been working well other than the plastic holder I broke because I went stupid tight on it.
https://www.wildhorses4x4.com/product/Machined-Aluminum-Plug-Wire-Divider-Satin/broncoperformanceignition
Thank you, that’s an interesting option