Holley Sniper plug wires? What are you using?

[Todd Baumann]

Holley Sniper plug wires. What is everyone using?
Curious trying to get something that fits nicely and over the valve covers.
Not sloppy and needs special wire looms.
Protects the system from any RF etc.
Thanks in advance

[frankeeski]

I'm guessing this is going on a SBF Todd. I've been using the pre-terminated sets from Taylor for my FiTech and Sniper installs. I like the 135* boots to keep them off of the headers. I believe these are the ones I ordered last. Price is pretty good too.

https://www.summitracing.com/parts/tay-51058/make/ford/model/mustang/year/1993

[jwhit]

i like the ford racing 9mm wires less than $50.00 set 3 color options151198151199

[Papa]

Here is what BluePrint Engines used on mine.

https://thefactoryfiveforum.com/attachment.php?attachmentid=84658&d=1524442074

I know you mentioned not using a loom, but they sure keep things tidy.

[Blitzboy54]

I used the MSD Superconductor 8.5mm. Only problem is I ordered the straight connectors but with the headers reversed they touch on the driver side, but 90's don't work on the passenger. 45's would be perfect but I have half 90's and half straight since I built them myself, Holley sent me the 90 ends and no cost.

[Hellion]

I like the Taylors myself, but went the custom route by making each wire the length I want. That way, you get the exact fit/look you want. I also used their loom set for a nice clean look that does not go over the valve covers.

Wire set - https://www.ebay.com/itm/154357379412

Loom set - https://www.ebay.com/itm/173486737533

[FF33rod]

Hey Todd, hope all is going well with you guys at the school!

On my 347 with Sniper, I used a Ford Racing set Ford Racing M12259M301 Spk Plug Wire 45D Black
These go around the front of the valve covers though, you don't have to go over.
Used wire separators similar to the ones Hellion posted above.

Steve

[bobl]

Take a look at the DUI Live Wires. Not cheap but they are really nice.