WTB footbox vent kit for Roadster

[alexmak]

Hose, ducts, valves, etc — if anyone is selling theirs.

[Fman]

Alexmak, I did a budget FAV system see attached link in my build thread for a list of parts. Key to this working is under hood temps need to be as low as possible otherwise you will get hot air out of the vents. I finally got my underhood temps down and the footbox vents are actually working, is nice to have some fresh air blowing in.

https://thefactoryfiveforum.com/showthread.php?35778-Fmans-Dart-427-build-9818-Nor-Cal-Registered-in-CA/page5

I also added some choke cables to add to blast gates to make them open and close.

https://thefactoryfiveforum.com/showthread.php?35778-Fmans-Dart-427-build-9818-Nor-Cal-Registered-in-CA/page8

Last mod I made was adding these Air Vent Ducts.

https://prdcrrct.com/product/nose-vent-adapter-kit/

With everything listed above should be less than $200.

[PaulProe]

We can supply individual components up to a complete system

https://prdcrrct.com/product-category/air-vents/