302/347 Headers for '35 Truck

[Chris Wingardh]

FFR tells me I need Shorty headers with 1-5/8 tube to heads and 3" pipe to 3 bolt collector. I would like to get ceramic coated or stainless. I can find lot's of headers at Speedway,Summit,Jegs, Amazon but none that fit the desription above.

Anybode got a good source for this?

Thanks,

Chris

[FF33rod]

It should be the same as the hot rod and BBK 15150 worked perfect https://www.summitracing.com/parts/bbk-15150

Steve

[wallace18]

Fox body shorty headers work. BBK is a good choice.

[Chris Wingardh]

It should be the same as the hot rod and BBK 15150 worked perfect https://www.summitracing.com/parts/bbk-15150

Steve

Thank you Steve.👍

[Chris Wingardh]

Thank you Wallace ��

[Chris Wingardh]

I need more help: Emailed my FFR Rep Mike on Tuesday asking about the header collector connection and emailed and zero response yet. Not Happy! ( Today is Friday) He told me its 3 bolt on the collector from FFR and the comments here points towards Headers with a 2 bolt connection. What am I missing? Should I specify a 2 bolt connection from FFR? 3 bolt shorty headers seem hard to find or very expensive.

What to do?

Chris

[Robodent]

I have a SBF 347. And it’s a 2 bolt . I believe 2 is what your looking for. Hope others chime in and confirm what they have.
Rob.

[FF33rod]

There's a knowledge gap at FFR since Tony Z left. Add to that the very challenging supply issues all over the world.....

it's 2 bolt, with a 2.5" collector. The BBK headers I mentioned above were recommended by Tony and work perfect. Sounds like you don't have your kit yet to be able to see first hand. As long as you specify (or have specified) "Installing Ford 289/302/351W Engine" on the order sheet you'll be good.

Steve

[Chris Wingardh]

Thanks Steve, finaly got it straightend out. And yes it is as you stated.

Chris