What are these 2 aluminum pieces?

[Bob Loutonx2]

150410

[edwardb]

They go in the rear inside corners of the interior. The rounded part is the top. The small round cut-out goes around the roll bar. They're shown in the manual toward the end because they can't be riveted in until the cab is installed for good. So they're separate from all the other aluminum panel installation instructions.

[Bob Loutonx2]

Thanks, I thought I had tried them everywhere.

[Bob Loutonx2]

Thanks,they must have changed the manual. I looked at all photos as well as the digital manual and can not see them.

[Cam1919]

This is my first build and these 2 (Left &right cockpit rear inside covers) still have me stumped. Does any one have a picture of them installed?
Thanks

[edwardb]

This is my first build and these 2 (Left &right cockpit rear inside covers) still have me stumped. Does any one have a picture of them installed?
Thanks

Does this help? Right side. Just setting in place. Not attached yet. The carpet kit includes a piece that wraps it including the top.

https://thefactoryfiveforum.com/attachment.php?attachmentid=165367&d=1649766737

[Cam1919]

Edward B
Thank you!! I thought I tried every way except the way your picture shows.
Thanks for the help.

Cam