toadster
07-02-2021, 08:20 PM
I am redoing my brake setup due to the HCU needing bubble/ISO flare instead of double-flare :eek:
I'm also going to change to 1/4" input for the HCU, so I assume I need different adapters for the output on the master cylinder (see yellow circles below)
what adapters do I need?
https://i.imgur.com/jpmzNs2.png
just to show the HCU... the 2 ports on the bottom of the pic are 1/4" inputs, and FOUR 3/16 outputs...
https://cobradreams.com/wp-content/uploads/2020/04/GT500_front_line_input.jpg
I'm also going to change to 1/4" input for the HCU, so I assume I need different adapters for the output on the master cylinder (see yellow circles below)
what adapters do I need?
https://i.imgur.com/jpmzNs2.png
just to show the HCU... the 2 ports on the bottom of the pic are 1/4" inputs, and FOUR 3/16 outputs...
https://cobradreams.com/wp-content/uploads/2020/04/GT500_front_line_input.jpg