Exhaust hangers

[kd0wda]

The instructions on hanging the exhaust are a little light and I haven't been able to find any great photos to reference. Could someone please confirm this is the proper arrangement?

149895149896149897

Also, are the FFR exhausts different on each side? I noticed my passenger side flange is much tighter than the driver side, which seems odd. In fact, I cannot rotate it at all and need to insert the bolts in the opposite direction to get them to fit. Anyone else run into this? At first I thought it was the coating, but one side is noticeably looser (see photo).

149898

[Alphamacaroon]

I think the answer is "whatever way you can get them to line up" :D Can't see anything wrong with the way you have yours. Mine had a similar "twist" to them. But honestly, until you get the body mounted it's really hard to tell how they will ultimately look. When I first installed them before I had the body on, they looked perfect, then when the body was put on they needed a lot of adjustment. I ended up needing some wedges from Breeze and smaller bolts so I could rotate it. But with the new ball and socket type exhaust from FFR you'll probably have a much easier time.