View Full Version : MK IV Tie rod ends
ggunter
06-23-2021, 08:02 AM
Does anyone know which year Mustang the Tie Rod Ends are from on the MKIV. Mine will not let grease go into the ball socket area, I can see grease pushing into the bottom of the tie rod to the point of starting to push out the crimped in steel cap but nothing will go up top. Easier to buy some Moog ends then deal with getting new ones from FFR.
ggunter
06-23-2021, 08:13 AM
I assume it's 99-04 mustang but Ive' assumed wrong before.
Moog ES2150RL
This thread should help:
https://thefactoryfiveforum.com/showthread.php?34043-Part-Numbers-for-Commonly-Upgraded-Parts
ggunter
06-23-2021, 09:23 AM
Thanks Papa, great help!
AC Bill
06-23-2021, 05:07 PM
Sometimes depends on the steering rack. Some you need longer tie-rod ends than the stock Mustang ones.
Donor rack, or Flaming River, or other aftermarket, manual rack?
rich grsc
06-23-2021, 06:53 PM
Just drive them for awhile and they will loosen up.
ggunter
06-24-2021, 12:41 PM
I believe it is the flaming river. It is the power rack from FFR