Great work performed by FFF vendor 520 Speedworks

[scott554]

Wanted to give a shout out and recommend 520 Speedworks a forum vendor for any of your wiring or dash replacement needed. I had the pleasure of meeting Greg and dropping off my MIII for him to clean up the rats nest behind my dash and install a new carbon fiber dash with new FF gauges along with his custom relay boxes to run the Russ Thompson Turn Signal and flash to pass system . The job Greg did in a week was amazing and the final results were even better than I could have imagined. I have attached a couple pics of the work done.
149545149546149547149548

[AtlantaCobra]

Where are they located?

[GWL]

Where are they located?

Easy ten second search::rolleyes:

520 Speedworks
4162 W Glance Mine Pl, Tucson, Arizona 85745, United States

520-800-6006

https://520speedworks.com/

Looks like Scott554 had the older Russ Thompson wiring for headlights and turn signals. 520 Speedworks used their own relay box to eliminate the buss bars at the top of the firewall and a lot of wiring. I'm going to do the same thing as my wiring behind the dash needs to be a bit cleaner so I'll be able to eliminated a bunch of those wires and relays. However, I'll use a different relay setup.

George

[scott554]

Easy ten second search::rolleyes:

520 Speedworks
4162 W Glance Mine Pl, Tucson, Arizona 85745, United States

520-800-6006

https://520speedworks.com/

Looks like Scott554 had the older Russ Thompson wiring for headlights and turn signals. 520 Speedworks used their own relay box to eliminate the buss bars at the top of the firewall and a lot of wiring. I'm going to do the same thing as my wiring behind the dash needs to be a bit cleaner so I'll be able to eliminated a bunch of those wires and relays. However, I'll use a different relay setup.

George

You are correct, he used there relay box they manufacture and sell for the Russ Thompson setup and the hazard lights. Just wanted to throw out there as Greg is a veteran and great person to work with and did a great job!

[toadster]

Wanted to give a shout out and recommend 520 Speedworks a forum vendor for any of your wiring or dash replacement needed. I had the pleasure of meeting Greg and dropping off my MIII for him to clean up the rats nest behind my dash and install a new carbon fiber dash with new FF gauges along with his custom relay boxes to run the Russ Thompson Turn Signal and flash to pass system . The job Greg did in a week was amazing and the final results were even better than I could have imagined. I have attached a couple pics of the work done.
149545149546149547149548


wow nice cleanup! what was used to attach the CF dash to the frame/body?

[Planecrazy1976]

Toadster I just used the same set up Scott had with screws across the top and built two braces for the bottom. But the dash could be installed with Velcro, brace, and screws on the bottom. only issue is maybe getting the Velcro to release with the little space between the body and dash.

[Planecrazy1976]

Scott, Thank for the kind words and allowing me to work on your gorgeous car. I am glad you are happy with it.

[Planecrazy1976]

Atlanta cobra, I am located in Tucson Az. You can ship and I do travel. Email me or call and can figure something out.

[mbisett]

Wow - really like the final product! Nice work 520!

[JV1953]

520 great work!! Looks awesome! When is the next wrecked cobra video coming?

[Planecrazy1976]

520 great work!! Looks awesome! When is the next wrecked cobra video coming?

JV Hope to get it out in the next few days. It has really been a crazy few months. Thanks for watching!

[michael everson]

Just curious why your Steering wheel is in between the 2 piece hub? Both pieces should be behind the wheel.
Mike

[Planecrazy1976]

Thank you.

[Planecrazy1976]

Mike, I saw that, but it was the way the customer brought it to me so I left it alone.