Parts not used in build

[WaltR]

Everything listed is extra parts from FFR I received with my kit that I didn't use except the cup holders. I put the pricing at about 50% of the cost new from FFR. Most parts were never used except as listed below.

Everything cost plus shipping!

SOLD - Side pipes with hanger hardware - $238 were on the car for go kart, approx 10 miles
SOLD - Front bumper - $100
SOLD - Rear bumper - $100
SOLD - Engine mounts - $75 Box says for 4.6L Mustang motor
SOLD - Radiator hoses - $50
SOLD - Accelerator Pedal and cable - $45
SOLD - Hood Pin set - $10
SOLD - Brake master cylinder reservoir - $30 I installed this on sheet metal but never put any fluid into it, then removed, so never really used
SOLD - Battery Disconnect - $20
Coolant overflow tank and mounts - $40
SOLD - Transmission mount - $20
Rear view mirror - $20
SOLD - Dash support - $45
SOLD - 2 Stainless cup holders 3.5" wide, 2.25" tall - $10 for both
Intake with filter - $40 filter has a bugger on it - see pic
Battery hold down - $10
Flex fuel line with connections - return line - $15
Clutch cable - $20 installed and only used on the car lift before go kart stage

Misc small stuff for sale - make offer - or could be included for free with an order of other parts...

Shifter boot
heater hose diverter
SOLD - charcoal fuel canister

I usually check this forum once per day and will honor the first come first served PM. Thanks, Walt

https://thefactoryfiveforum.com/attachment.php?attachmentid=149070&d=1622900896

https://thefactoryfiveforum.com/attachment.php?attachmentid=149069&d=1622900896

https://thefactoryfiveforum.com/attachment.php?attachmentid=149071&d=1622900896

[Jim Wehr]

I will take the dash support please.

[Lickity-Split]

I'd like the side pipes. I want to do some experimenting with mufflers.

I have no idea what shipping might be from you to 49286?

Paypal is easy if you have it?

Thanks!

Skip

4speed@comcast.net

[Jones375]

Can I get the cup holders. Can’t PM right now for an unknown reason.

Shipping to 95757. Thanks

[WaltR]

Email and PM's sent.... thanks

[Fullchat289]

PM Sent on the front/rear bumpers.

Thanks,

- Allen.

[Johnsmc]

Do you have the J pipes from the headers I have a 351w and just discovered they shipped me 4.6 pipes several years ago when the kit was purchased. johnsmc1951@gmail.com

[WaltR]

No, don't have any J pipes.

[frankeeski]

Do you have the J pipes from the headers I have a 351w and just discovered they shipped me 4.6 pipes several years ago when the kit was purchased. johnsmc1951@gmail.com

John, I have a couple sets of j-pipes for SBF. Also have a set of cats for same. I'll email you later.

Frank

[PG_Cobra]

PM sent on hood pins

[marshc56]

Intersted in the brake reservoir and the accelerator pedal, if they're still available.

send me a PM with pmt info

marshc