Hood and side panel fitment

[jmccrack]

I just finished fitting the cowl to the grill , hood to the cowl and body and the sides to the hood and cowl. I wanted to say in my case anyway what a great job FFR did on those parts. To be sure there is trimming to do but over all the panels were great to fit together. I took the advice of Wallace18 and cut my side panels. You can see where. And there were so much easier to fit. My next step is to bolt everything in place then gap everything.

147503147504147505147506147507

[Robodent]

Looking good . Are you going to cut some vents in the side panels? Most guys are doing that to vent the engine heat then installing some type of screen on the back side. Now would be the time to play around with it and lay it out to see which design you like. Just my thoughts. Rob

[jmccrack]

Absolutely!!! It would be great if I could find the same louvre I have on my 34.

147518